Product description:
-This full set LCD & touch screen digitizer glass assembly is compatible For iPhone 7 (4.7inche).
-Tool list: 1 x Cross screwdriver 1 x Plum shaped screwdriver 1 x Plastic Opening Tool 1 x Triangular pry piece 1 x Suction Cup.1 x Alcohol wipe package.1 x tempered glass protective film
-Home button and camera are not included.
-Colour:black.
attention：
-Please disconnect the battery cable before installation or make sure your phone is powered off. This will protect your phone from incorrect installation damage.
-There are many screws when you replacing the assembly which are different in size and length. You'd better to mark them otherwise it may broke the screen if you put the screw in wrong place
-When disassembling your Phone, please don’t just pull the screen out directly.
-The ribbon cable of the “Home” button is connected to the screen.
-It is very Easily broken you should open up the screen a little,disassemble the ribbon cable and then get the screen out.
-When install the screw of the camera, please notice that the long screw must be at the top left corner, or it will damage the LCD screen.
-If the phone is deformed, it is easy to get stuck when installing, please do not press down directly.
-It’s easy to burst the screen, you should press it downward by flat pushing.
-The screen belongs to fragile items, so please be careful when you install it in case it break
Copyright © 2020 All Rights Reserved by Ifexes. Powered By Cyfa - Tech
Active
